• Radiation source: Metal Halide Lamp, 1 x 1500 W (Type MH); 1 x 1200W (Type MHG)
• Chamber volume: 580 x 765 x 750 mm (WxDxH)
• Filter system: Outdoor/Indoor
• Irradiance: 1000W/m2 (Type MH) ; 800-1200 W/m2 (Type MHG)
• Spectral distribution: Global Radiation 280 ? 3000 nm (Base: CIE, Table 4; Share: DIN 75220, Table 1, Column 2/4)
• Temperature ranges w/ radiation: -20 °C to 100 °C
• Temperature ranges w/o radiation ?30 °C to 100 °C
• Heating rate: 3.0 K/min
• Cooling rate: 2.5 K/min
• Irradiated area approx. 1600 cm²
• Touch control panel
• Micro-processor monitoring and control unit SIMCON/32
• Digital customer I/O, potential-free 24 V, 4 freely disposable inputs/outputs
• Independent adjustable temperature limiter tmin / tmax
• Adjustable software temperature limiter min./max.
• Humidity input and display in % rel. humidity
• Centronics printer interface
• Serial interface RS 232
• Potential-free contact for switching-off of test specimens
• European socket
• Calibration of 2 temperature values and 2 climate values
• Air-cooled refrigeration unit
• Condensation protection (dehumidification during heating phase)
• Aerosol-free humidification and dehumidification
• Psychrometric humidity measuring system
• Water supply tank for humidification water with level indication
• Automatic water replenishment with low water alarm
• 1 Entry port, NW 50 mm, left-hand side
• 1 Entry port, NW 125 mm, right-hand side
• 1 Shelf made of stainless steel
• 1 Set of operating instructions
• Temperature range +15 °C to +80 °C
• Temperature fluctuation with steady state conditions according to IEC 60068-3-5 depending on the test space temperature temporal d±0.5 K
• Humidity range 10 % to 80 % r. h.
• Dew point range +5 °C to +74 °C
• Humidity fluctuation with steady state conditions depending on climatic value temporal ±3.0 % to ± 5.0 r. h.
• Temperature range approx. -20 °C to +100 °C
• Temperature fluctuation with steady state conditions according to IEC 60068-3-5 depending on the test space temperature temporal d±1.0 K
• Radiation intensity 1000 W/m² in the range from 280 to 3000 nm, in a distance of 600 mm
• Homogenity ±5 %
• Spectral radiation performance according to DIN 75220 Tab * 1 print 2/4
• Kind of radiation metal-halogenid lamp, 1 x 1,5 kW
• Irradiated area approx. 1600 cm²
• Temperature range approx. -30 °C to +100 °C
• approx. -40 °C to +120 °C (light transmission aparture closed with optional isolation cover) Temperature fluctuation with steady state conditions according to IEC 60068-3-5 depending on the test space temperature temporal ±0.1 K to ±0.5 K
• Temperature rates of change according to IEC 60068-3-5 heating: approx. 3.0 K/min. cooling: approx. 2.5 K/min. Calibrated temperature values +23 °C and +80 °C
• Temperature range +10 °C to +90 °C
• Temperature fluctuation with steady state conditions according to IEC 60068-3-5 depending on the test space temperature temporal ±0.1 K to ±0.3 K
• Humidity range 10 % to 90 % r. h.
• Dew point range +5 °C to +87 °C
• Humidity fluctuation with steady state conditions depending on climatic value temporal d±3.0 % r. h.
• Calibrated climatic values +23 °C / 50% r.h. and +90 °C / 50% r.h.

Reference Test Specifications include:

EPA or others.

DIN 75220
Ageing of automotive componentsin solar simulation units

MIL-STD 810
Environmental engineering considerations and laboratory tests

• Insulated cover: Expands the temperature range to -40°C to +120°C
• Misting equipment: Expands the test possibilities in the area of climate
• UV sensors: 280 nm to 320 nm / 320 nm to 400 nm
• Control of black standard temperature
• Black standard temperature sensor
• SolarTest sensor: 300 - 3000 nm
• Printer: 6-color, programmable
• S!MPATI software for Data Acquisition
• RS 422/485 interface