Dust testing chambers
ST 1000
These chambers are used to test according to DIN VDE 0470 T1 or EN 60529 for testing of the protection classes IP 5 X and IP 6 X. The ingression of dust into enclosures is tested. The systems can be equipped with an under-pressure device so that the dust not only settles on the entire specimen but can also ingress into the specimen.
Weiss Dust Chambers allow reproducible testing of the resistibility of electro-technical products against dust, and the determination of IP-protection types by housings of electrical devices and equipment of road vehicles.
Main features
- Waste air exhaust via dust filter
- Abrasion resistance of all components in contact with the dust
- Transparent doors for easy charging, surrounding special gaskets
- Dust collecting section below the test chamber
- Wiper
- Vertical air flow
- Chambers are suitable to meet test specifications
- Compact design, ready for connection
- Easy operation
- Easy to service
Design features
- Waste air exhaust via dust filter (ST1000)
- Abrasion resistance of all components in contact with the dust
- Transparent doors for easy charging, with surrounding special gaskets
- Dust collecting section below the test chamber
Technical Specifications
ST 1000
- Test space volume 1000 Litres
- Test room lighting
- Mobile design
- Ports 50 and 100 mm
ST 600 and 2000
Dust test chambers for horizontal air flow with wind simulation.
Design Features for ST 600 and ST 2000
- Dust tests with wind simulation
- Housing made of galvanised sheet steel, lacquered
- Ring duct with integrated test space
- Horizontal air flow with temperature conditioning system
- Air velocity control (speed controllable re-circulating air fan)
- Abrasion resistance of all components in contact with the dust
- Large doors for easy loading, with surrounding special gaskets
- Dust measurement and control by means of a dust dosage device
- Dehumidification system (compressed air dryer)
- Operating hour counter
