Vacuum test chambers
Combined vacuum, temperature and humidity test chambers from Weiss Technik are best suited for stressing components used in the aerospace industry.
Extreme programmes can be simulated as required by the various industry standards.
Utilising the best controllers available, temperature, humidity and pressure are controlled to high levels of accuracy.
Automatic oil recycling into the vacuum system prevent pollutions of the room and lowers operating costs.
We also offer specially designed vacuum equipment including drive in vacuum test systems for exhaust gas emission tests on internal combustion engines.
Test chamber sizes and working areas adapted to specific requirements.
The vacuum-temperature and vacuum-climate test chambers WT/D and WK/D enable reproducible tests of highly stressed materials. Our chambers allow the simulation of extreme programmes in accordance with the relevant standards.
Evacuation is effected by the vacuum system, in which the test space atmosphere is diluted continuously until it reaches the required vacuum. Temperature changes under vacuum are also possible using a radiated conditioning system in the test chamber wall.
When the cabinet is operating under vacuum conditions there s no air insode the test chamber and so it is not possible to change the temperature. The only possibility is to have a conditioning system (Heating/cooling) built into the inside walls of the test chamber. The heat/cold is then radiated into the test chamber when there is no air inside the test chamber. This is not a standard fitting but an optional accessory for the Vacuum chambers.
Our vacuum test chambers start as small as 177 litres going upto 1350 litres.
Constancy of temperature in time
15% to 95% RH ( between 10C and 95C) Temperature range
-70°C to +100°C Humidity range
1mbar to atmospheric pressure
Technical data
| Test space volume | 150 / 300 / 500 / 1000 / 1350 Litre |
|---|---|
| Temperature range | -40°C ... +180°C |
| -70°C ... +180°C | |
| Humidity range | 15 ... 95 % r.h. |
| between | +10°C ... +95°C |
| Pressure range | Atmosphere ... 10 mbar |
| Control system | Controller Board S!MCON/32*-NET with Color-Touch-Panel. |
Climate Test Chamber with moveable Vacuum System
This vacuum tank can be integrated in a temperature or climatic chamber of the WT/WK series for occasional performance of vacuum tests. The inner test tank is made of high-grade stainless steel and is welded vacuum and steam tight. An external vacuum pump is used for evacuation, which is realised by continuous dilution of test space atmosphere until the requested vacuum is achieved.
Vacuum Test Chamber with integrated Vibration
The vacuum-temperature and vacuum-climate test chambers WT/D and WK/D enable reproducible tests of highly stressed components.. Our chambers allow the simulation of extreme programmes in accordance with the relevant standards. Specimen can be tested as to Vacuum and Vibration
The PDF below contains further information however please do not hesitate to contact us on 01509 631590 and we will be happy to discuss your specific requirements.
